If you have a Hisense TV, you may have experienced one of your lights flickering, indicating a problem. Fortunately, blinkers have codes that will help you identify what the problem might be and how to fix it quickly and easily.
This article guides you through the most commonHisense TV Flash Codes, so you can quickly identify and resolve your TV issues with ease.
jump to the point
Hisense TV flashing codes concept
Like other TV brands, Hisense also has some hint codes that help you understand what's going on with your TV.
Your TV will show these codes when it encounters a problem that prevents it from working properly. There are many indication codes, but the most dangerous codes are,
- The red light flashed 2 times.
- The red light flashes 3 times.
- The red light flashes 6 times.
- The red light on the TV flashes 10 times.
- And many more…..
All the above codes have their inner meaning and indicate the error your TV is facing at the moment.
Hisense TV base plate
|This is a motherboard replacement part for Hisense TV. It is compatible with almost all models.||Check it out on Amazon|
LED Backlight for Hisense TV
|If you think your TV's backlight is damaged and needs replacing, be sure to check it out.||Check it out on Amazon|
Fixing Hisense TV blink codes
You are now familiar with flashing codes on a Hisense television; it's time to know their meanings/indications; I will also explain some tricky ways to help you solve the problem quickly.
If you blink 2, 3 or 5 times, it means there is a problem with the backlight, motherboard, inverter or power board. On the other hand, if the red light on the TV flashes 4 and 10 times, the problem is probably with the main logic board or the cables on the inverter board.
There is no need to wonder how long the red light on Hisense TV blinks. Follow the steps below to get rid of this issue. Before that, take a look at the table below to better understand this error!
|Red light flashing 2 times||bad backlight|
|Red light flashing 3/4 times||Internal circuit board problem|
|Red light flashing 6 times||Problems with the motherboard or inverter boards|
|Red light flashing 10 times||Defective LED strips / Defective power board|
1. Reboot and restart your Hisense TV
If you are having trouble with this issue, please restart your TV first. After the reboot, if the flickering disappears, great. However, you can reset the TV by unplugging the cable from the wall outlet.
Wait at least 30 seconds and plug it in again. That is all! But unfortunately, if it doesn't work, you will have to restart your TV.
To restoreit is convincingmethod to fix any software related errors. However, if your TV is experiencing any software-related issues, then a reset will fix the problem. But keep in mind that resetting your TV to factory settings will delete all downloaded content including your credentials.
so stopreset your Hisense TV to factory settingsFollow the guide below.
- First, remove the power cord from the outlet. Then disconnect any additional cables connected to it.
- After that, press and hold the reset button on the TV for about 30 seconds.
- You won't need to do anything to jumpstart the process while you're doing your job.
- It may take up to 30 minutes to complete the reset. During this period, do not touch it.
- Finally, plug in and turn on the TV after the time has elapsed.
💡Related:Hisense TV black screen issue (Fix in just 30 seconds)
You can also reset yourHisense TV using remote control. Follow the guide below to do this...
- First, press the button “Casabutton on your remote.
- Or "settings” and then scroll down.
- Click in "device preference” and go to the bottom.
- Finally, click on “restart.”
I hope the reset solves your problem. But if not, then go to the next step.
Don't forget to check thesocket or surge protector, as these can be the main culprits for this problem. Also, make sure the source is turned on. If it is an HDMI failure, disconnect the HDMI cable.
2. Check the motherboard for damage
Another possibility is that, if the problem persists after the reset, your TV's motherboard has been damaged or some component has burned out.
Sometimes it will happen if the machine receives a large amount of electricity. However, you can open the TV to see if you have a basic understanding of how electronics work and what they should look like.
If you have any doubts, all you can do is hand it in for review. Don't do anything you don't want to do. The best option is to hand it over to Hisense for repair. After all, who knows their TV better than them?
3. Consider submitting a warranty claim
The worst part of this problem is that it is difficult to find a replacement motherboard for a Hisense TV. Most of the time, the only option is to replace the entire TV. The good news is that yourguaranteecan cover it. Make sure the term is still valid before claiming a new TV.
After that, they themselves will need to watch TV to make sure that the user did not cause damage. They may send someone to you under some circumstances. Others will require you to bring the television to them. If it wasn't your thing, they would probably replace the entire unit for you.
frequently asked questions
1. When does a Hisense TV flash red?
As mentioned, the Hisense TV flashes red when there is a problem with the TV. Red is usually associated with a bug or danger, so it's important to take note of this and fix the problem as soon as possible.
Another possible cause of a flashing red light could be a power issue. Maybe the outlet isn't providing enough power or the surge protector is bad anyway.
2. Why does my Hisense TV flicker?
There are a few reasons why your Hisense TV might flicker off and on. One possibility is that there is a problem with the power supply. Another possibility is that the TV is overheating. If the TV overheats, the cooling fan may not work properly. Finally, it is also possible that there is a problem with the TV itself.
This was comprehensive information about Hisense TV blink codes, their inner meaning and how you can fix them. If you still have other questions, feel free to comment here. Stay healthy and be happy with your device. See you in another article.
3. Ok, but still the red light on my Hisense TV flashes 2 times!
If your Hisense TV flashes red 2 times, it means there is a problem with the TV's power supply or the LED backlight.
The first thing to do is unplug the TV and plug it back in. If that doesn't fix the problem, try restarting the TV. To do this, simply unplug the TV from the electrical outlet, wait 30 seconds and plug it back in.
If the TV still does not work and blinks 2 times continuously, the backlight of the TV may be damaged. In that case, contact Hisense customer service for further assistance.